This application presents how to create a shear wave tensiometer that can track tendon forces inside the body during dynamic activities, using a Raspberry Pi 4B and MCC 172 IEPE.
This project presents how to create and run an automated test written in C to debug an H-Bridge DC motor controller and a stepper motor controller with Digilent Analog Discovery 2 Logic Analyzer, Static I/O, Voltmeter, and Pattern Generator.
Adam Taylor, an embedded design expert, shows you how to load the open source SiFive Freedom E310 RISC-V processor on Digilent Arty A7-100T Xilinx Artix 7 Development Board and run the Arudino application
A webinar showing how to set up a lab at home with Analog Discovery 2 will be held on May 28 9am (Pacific Time). Kaitlyn Franz, Test Product Manager at Digilent, discusses the features and tools within the Analog Discovery 2 that can ensure a seamless transition for engineers being fo…
You have probably learnt how to load ARM Cortex M3 on Digilent Arty A7. Now, we can make something out of it. Adam Taylor creates a motor control application.
