Trying to edit the placeholder image, but only get this: The content that you posted will be reviewed within 1 business day. It has been flagged for review either because it is your first post or because it was considered as SPAM.
The content that you posted will be reviewed within 1 business day. It has been flagged for review either because it is your first post or because it was considered as SPAM.
But I have a lot of 3D printer parts - stepper drivers, stepper motors… so I searched some more trying to fina a bot using stepper motors - then I found the great RS5 robot on this page.
Decided to make a bot using Nema17 stepper motors + 120mm “rower” rubber wheels.
Still planning, so I may alter the selected electronics… a lot of times before it is ready.
I try to get a clean setup - as a first step, I`ll try if it is possible to combine Raspberry PI 3B+ , an arduino (leonardo) Raspberry cape + a robot arduino shield + 2 stepper drivers
Yesterday I installed raspian + TightVNC + Arduino on my PI The arduino PI cape is programmed using a USB cable from the cape to the PI Was able to program the Arduino Leonardo on the cape from Arduino on the PI (remote from my windows 10 computer)
Anyone that have sample code/electronics setup for controlling an Arduino based robot using an Taranis X9D RC radio? Great if it support sending telemetry data to the 9XD (batteri status…)