Here is "InMoov", the robot you can print and animate. You have a 3D printer, some building skills, This project is for you!! This is a hand builded for a job (still picture commercial), it was supposed to be mobile but not animated and mostly be able to take human hand positions. Cables or fishing rods might be added in order to control it, but it was not the purpose of this work at first. I am now working on another model(for the fun), trying to animate it, I really would like to do it with computer control but I have never worked in that field.
It has evolved quite a bit since I started with designing the hand. Both arms are now fonctionnal with a torso and a head. I am using two Arduino boards controlled through MRL.
With the help of Myrobotlab and GroG, we will be trying to make the robot see and grab objects after a voice command.
For more parts and info, see:
http://inmoov.blogspot.com
http://www.thingiverse.com/thing:17773
http://www.thingiverse.com/thing:18939
http://myrobotlab.org/service/inmoov
Here is a BOM I just did for a university that was asking.
Of course you need to have a 3d printer. Hand and forarm:
2 arduino uno=28 euros ebay although I never found such a good price again.
12 servos MG995=84 euros ebay
Or 12 servos HK15298=180 euros Hobbyking( I recommand those because the others are cheap but they burn)
0,8mm nylon thread/fishing rod= 5 euros hardware store
Miscealenous Bolts= 10 euros hardware store
1500gr natural ABS= 70 euros orbi-tech
Arm and shoulder:
8 Hitec HS805BB=240 euros ebay (better get even stronger in torque and faster)
Hi, I’m printing the parts with a BFB 3D touch, but parts are designed to fit smaller printer. I know someone that prints it on a makerbot. As for the pads, I just poured some silicone directly on the ABS parts, I used accelerating hardener to make it fast, otherwise it would be uncontrollable. I found that it doesn’t holds very long, but gluing the pads again with silicone kit for bathtub makes it rather lasting. I tried this methode because I would like to inbed some FSR in them.(still need to order them though…)
You have an amazing Arm ! Your mechanical magic Fu is very strong. So when should we hook it up to a computer and get a couple of camera’s attached to it so it can start grabbin stuff it sees ?
P.S. I love that you posted your info on thingyverse - you & open source rocks !
Seriously, We could use MRL and a web cam to provide position feed back and object detection -
For sure you can print this on a Mendel. Some people did already. Parts are designed small enough. I have a heated bed because I print with ABS. If you get too much warping with your printer, it might be an issue on some parts though.
There is a lot that can be There is a lot that can be done here and I hope that your "fun" will turn into something great for the world as a whole. Think about it, you can change the world by having fun. Thanks for sharing.
Robotic hands can really help those who need it in the future if you want to make your own so even though these fun things that people are creating are just fun, it could develop into more.