For my second project, i decided to upgrade a bit on my first robot. The only extra part is a line follower kit (AXE 121) which i had already acquired from Tech supplies UK. As you can see, i removed the SRF 05 from the board and replaced it with a neat line follower package from Picaxe.
ATTENTION TO ALL AMATEUR SOLDERERS
Do not solder in a hurry, i tried to solder the AXE 121 PCB in a hurry. I soldered a resistor array in a wrong way, and then subsequently fried my board.
UPDATE
i will get a new board and start this anew.
this is the line follower bot showing its PPCB
follow lines
- Actuators / output devices: 2 geared motors
- Control method: autonomous
- Programming language: Picaxe basic
- Target environment: indoor on smooth surfaces
This is a companion discussion topic for the original entry at https://community.robotshop.com/robots/show/crimson-the-line-follower