The Lynxmotion Quadrino Nano uses the MultiWii project and it therefore needs an initial setup in order to work properly. Some of the on-board sensors will require calibration to perform correctly and in this tutorial we will cover the basic operations for this calibration.
When using the Lynxmotion Quadrino Nano as a UAV flight controller (or another MultiWii based controller), the ESC's (electronic speed controllers) used to drive the brushless motors need to be calibrated. This is to normalize the RPM output for a given input signal on all motors. ESC's …
Big release this week, the FAA regulations about Unmanned Aircraft System (UAS) is finally released and it will affect any UAS flying in the United States. Starting on December 21 the federal law will require all UAS to be registered. This will apply to owners of drones above 0.55 pounds (0.45kg) b…
The Quadrino Nano UAV flight controller uses MultiWii which allows for a standardized serial communication of live data from the controller. Since this protocol is known and used for the standard general user interface (MultiWiiConf & WinGUI), some people developed their own application to setu
This article is intended to help you get started with battery monitoring and the buzzer feature present in MultiWii. We'll cover proper connections / wiring and software setup as it relates to the Lynxmotion Quadrino Nano flight controller (MultiWii compatible).