I purchased Johnny 5 kit has SSC-32 with 2x5 sabertooth. I purchased the [size=2]Droids SAS XBee - DTE Serial Board (DB9) [/size][size=2]Product Code : RB-Dro[/size]-03 and was wondering could I use this with lynxmotion sequencer software to control the SSC 32 instead on the RS-232 cable. It seems that in theory it would work. I have the [size=2]Droids SAS XBee communicating as in light flashing on both computer and Droids SAS XBee. Any information would be greatly appreciated. This is the first SSC32 I have used usually do Arduino.[/size]
Yes, this should work. Have you configured the SSC-32 board to use the 9600 baud rate to work with the Xbee, instead of the default 115,200?
If you can include a picture of your setup, showing XBee connections and their lights, that would be great.
Thanks,