Hi!
I require your help regarding a problem I’m encountering.
I have a Winbot930, with a remote that doesn’t seem to work, and when operating manually will power up, stick to the window, and start moving.
On start up, it will make one quarter turn to the left, but will encounter an error once it gets to the 2:00 position. If interrupted it will do the same but move another 10 minutes to the 4:00 position.
it does not seem to be mechanical, as movement is fluid.
so it seems to be a sensor or software problem.
Is there a reset button on the machine, or some way to clean and check the sensor?
Also - Where can I find a remote replacement?
Thank you so much in advance for your help!