Which battery should I use for an brushless motor

HI there!

Fot this motor

http://www.nex-robotics.com/products/quadrotor/920kv-11-1v-brushless-dc-outrunner-motor.html

which battru should I use?

for batteries you can refer 

http://www.nex-robotics.com/products/batteries-and-chargers.html

Thanks

 

A matched motor driver for

A matched motor driver for that motor said it can use a 2-4 cell battery, so 7.4V to 14.8V battery.

okay, thanks.Whats that 20C

okay, thanks.

Whats that 20C discharge thing with the battery.

Does the mAH value of battery matterin this context?

Along with that motor I wana drive 4 servos.

"C" is peak discharge rate

The 20C is a peak discharge rate. 20C is generally pretty high - in fact many packs can’t actually deliver 20C and it’s marketing lies.

 

 

This one

http://www.nex-robotics.com/products/batteries-and-chargers/lithium-polymer-3cell-11-1v-4000mah-20c-discharge-battery.html

Be careful when charging it - it doesn’t seem to have balance leads - none of them do. So ideally charge it outside.

If that weight is too much, or it’s too expensive, or physically too large,  then this one would do - but it won’t last as long between charges:

 

http://www.nex-robotics.com/products/batteries-and-chargers/lithium-polymer-3cell-11-1v-1800mah-20c-discharge-battery.html

 

With LiPo’s you MUST be very careful discharging them. I would very strongly reccomend you buy one of these:

http://www.nex-robotics.com/products/batteries-and-chargers/protection-circuit-for-3-cell-li-po-battery.html

 

or build your own. On a personal note, I wouldn’t let a 11.1v LiPo set get below about 10.2v without starting to worry. 

If the barries discharge too much - and if your lucky - you will ruin them, and they’ll never charge again. If your unluckly, they will buckle ( physically blow out of shape ) and then when you charge them they can burn rather spectacularly.

 

 

 

What about that motor should

What about that motor should I use that 1? 

Or what can you suggest?

Makes me wonder about those

Makes me wonder about those 30C packs I’ve seen…