Hi, I am trying to source for replacement wire connectors for my robot. However I am not sure what connector it is. I have uploaded an image - if anyone can identify the connector please let me know. Many thanks.
Hello @s_lacke_r and welcome to the forum,
It looks like a 3-pin Female JST Cable. I’m not sure what the other end looks like but maybe one of these could work:
Or you could also search for it in the Jumper Wires section of the store.
I hope this helps, let us know if you need more assistance
Thanks Geraldinebc15. I checked through some JST pictures and don’t think they are JST connectors. I read somewhere else that the Robotis XL 320 cables may work and it does seem that the connectors are based on the 3P XL
https://www.bananarobotics.com/shop/Dynamixel-XL-Cable-3-Pin-190mm-5-pack
The 3P XL cable seems to be a proprietary design.
Are they any common connectors that can be adequare substitutes? Would be easier to source for me. Thanks again.
Yes, you are right!
I found this information:
https://emanual.robotis.com/docs/en/dxl/x/xl320/#connector-information
According to it, the cable uses a MOLEX 51065-0300. Unfortunately they’re not available in RobotShop, but you could find them in Mouser or Digi-Key.
Thanks for the tips!