If you are the original author, please access your User Control Panel and update it.
My son had a broken Silverlit helicopter, so I decided to upgrade the Infrared Remote Control to RF using the Cheap TX433 module. The remote control has one joystick, one sliding pot for the accelerator, one switch for the channel selection, and a few buttons for the light and the trim.I removed the CPU and created a small board with the PICAXE 14m2 connecting with wires all the inputs from the sensors (joysticks, pot, switch and buttons). The joystick and pot are connected on the ADC channels, and ...
This is a companion discussion topic for the original entry at https://community.robotshop.com/index.php/robots/show/upgrade-silverlit-remove-control-with-tx433-and-picaxe