If you are the original author, please access your User Control Panel and update it.
This is my first attempt at a walking robot...thoroughly inspired by Penny and Stomper. :) Chassis : I had loads of pen refill tubes lying around on my table (by-product of a month of exams) so I used those to build the legs.They're connected to old mechano pieces using hot glue,this is then connected to the servos.For the main body I used an old plastic case I had lying around.The dimensions are 16cm X 13cm X 9cm (L x B x H). MCU : Used a pro mini clone for the mcu.It's soldered on to ...
This is a companion discussion topic for the original entry at https://community.robotshop.com/index.php/robots/show/three-servo-hexapod