Hi! I have a SunFounder Picar X and I’ve been trying to calibrate it but I’m having no luck. I followed this video to calibrate the servos: https://youtu.be/1QmBQmhpj_4?si=3S2qT67osRru3aQk&t=1586 and after that, the camera does not tilt up or down and makes a clicking noise. The camera does however move left and right but very slowly. The wheels go forward and left but when it tries to go right, it starts clicking and it won’t go the proper direction based on the tutorial code provided by SunFounder.
I’m not sure if this sounds like a calibration problem or if its a hardware issue such as a burnt out motor but any help would be helpful!