Hi
I need a stepper motor that can pull a load of around 25kg. The stepper motor will be attached to a toothed belt, that is connected to plate that will move left and right on rollers.
Can anyone recommend a suitable motor and possibly controller to attach to a raspberrypi3?.
Many thanks
Hi andywantall,
The load of 25kg is after the toothed belt and is there any gear ratio in this belt system ?
If there is a geared down ratio you will have more torque from your motor, and less speed at the same time.
Something like this might be useful:
12V, 1.7A, 416 oz-in Geared Bipolar Stepper Motor
DC & Stepper Motor Driver HAT Kit for Raspberry Pi
