I’ve looked everywhere for a pre-built solution, and there just isn’t one. (There’s a stalled Indigogo campaign, search “MOVEZ”).
Looking for recommendations on a suitable stepper motor and assembly to pull my standard window blinds cord. It’s a standard cord loop, and I’ve no idea what sort of cogs or pulleys I should be looking for.
I’m pretty experienced with RasPis and tinkering with GPIO pins and badly soldered stripboard. The end result would probably end up being controlled by a Home-assistant instance or similar, through an Echo. I may even go to the extent of 3D printing a mounting box if all goes to plan, or at least use it as an excuse to buy a cheap printer.
Many thanks in advance for any help or recommendations you can contribute.
Ben