hi
i read the topic in this forum…i am also working oon same…could u tell me that…we can connect 6 analog inputs through multiplexer to one analog input pin…but what about select lines…which pins should i use for select lines…what r control pins of ssc-32…the three other analog pins are input and not output…so ii cannot use them for select lines
mannat
Why don’t you just use the pins you want to use? There is no magic here. Just pic some and go for it. I would recommend you chose pins from the same bank. So use as many as you need from these ports. 0-7, 8-15, 16-23, 24-32. Just send commands to direct the multiplexer to the channel you want and then take your analog reading.