Slamtec S2 LIDAR RoboStudio Connection

I have a Slamtec S2 LIDAR and trying to get it connected via RoboStudio. I’ve installed everything, device manager sees the COM Port but RoboStudio only has a icon for “Robots” and not for LIDAR as shown in the manual. I’ve installed it a few times with no luck. frame_grabber.exe does not work I guess because the highest baudrate listed is 256000 and the specs say 1M baud. Anyone else have this issue with a S2 or A1,A2 or A3?

Dear Sutherland,

I suffer from the same problem.

Were you able to find any solution?

Hello @DrSutherland and @Ates ,

We are sorry to hear that you are having trouble with your LIDARs.

We recommend contacting the manufacturer directly to help you fix that issue:
[email protected]

Let us know if you need further assistance.

Sincerely,