my first robot, thanks to frits start here and his help I have built a robot. It is simple, it has a speaker, and two motors, thats all.
Im thinking about putting some leds and a lcd screen on it.
Positive comments gladly accepted and suggestions.
If you give me a product to look for give me a link please so I know what it is.
Thanks LMR!
Goes to places and plays tunes. Makes me happy and proud.
Actuators / output devices: 2 motors, 1 speaker
CPU: Picaxe 28x1
Operating system: Mac
Programming language: Picaxe basic
Target environment: indoor
This is a companion discussion topic for the original entry at https://community.robotshop.com/robots/show/simple-but-satisfying-begginers-robot
nice start here robot. good
nice start here robot. good job.
buy the line follower kit and IR remote kit from picaxe
and buy around 6 cheap servo’s to make a hexpod
make rf module controlled bot
well i must say good start
now u can also try making wireless robot
using a transmitter-reciever pair (RF module)
it is eaisly available at radioshack shops. u just have to connect it and den 4get wires
nick, for rf modules u will
nick, for rf modules u will need 2 picaxe. if u get a ir remote kit it is cheaper and easier to buy an IR remote kit to control your robot
ok, thanks guys I appreciate
ok, thanks guys I appreciate it. does anyone know if I can get frits’s “yellow chip” on robot shop.com
Yippee
thanks to everyones help I won blue at my county fair thanks.
dizzle
September 12, 2010, 6:12pm
7
could you help
could you help a RedLeg on up on connecting a speaker. ive tried 3 million ways, not getting anywere
sorry im slow on replying.
sorry im slow on replying. what system do you have?
phozon
November 15, 2010, 8:05am
9
hey, about that
hey, about that yellow…it’s actually pretty dumb if u only want to buy that fmr robotshop bcoz u have to pay fr shipping…so instead , you can get 8 330 ohm resistors and put in the “yellow chip” slot