is there away to sychronize the y axis motors my on side on the xxl lags abit at times.
Hi chapmanrm,
The two motors should output at the same time.
Do you have problems of one motor not moving in sync ? Maybe there is a restriction mechanically ?
I have leveled the machine several times and cleaned and check the tension on the belts and it still does not move together, you can notice it with circles.
I’m unsure i understand the problem exactly.
Do you have a problem of sync between the two Y axis motor or you do not get a round circle which involve movement between the X and Y axis ?
You might want to update your GRBL controller, maybe there are some values wrong in the settings with change the calibration.
docs.carbide3d.com/support/carbideupdater/
sync problem with the two y axis motors.
The outputs should be in sync from the GRBL controller.
Is that happening while cutting (in material) or also in dry-run ? At that point you might want to contact Carbide3D as it’s not normal.