I have the Scorpion Dual RC H-Bridge and am using it to control my R/C robot which has two 12v motors for differential steering and is run from a 12v gel cell. I’ve noticed that sometimes when I command the robot to move (for instance move forward or turn) it gets stuck doing that and I no longer have control. Moving the controls of the transmitter have no effect at all. Servos that are plugged directly into the RC receiver are still completely functional, but the only way to regain control of the motors is to turn the rover off and back on. Any idea what might be causing this and how I can fix it?
Thanks for the help!
Eric