I was wondering where I can find a complete step by step assembly manual for the rover im trying to put together. im just a little lost on the battery hook up and where to connect my xbee devices also. please point me in the right direction.
You can find the complete DFRobotShop Rover manual here. You will find links to assembly videos which are also duplicated in the multimedia tab of the product description. If you have the XBee version, then you need so solder the two XBee headers to XBee 2 on the board. The LiPo battery connects at the rear of the board to the white JST connector and is tucked in between the gearbox and the lower shaft. If you have any additional questions do not hesitate to ask.