If you are the original author, please access your User Control Panel and update it.
Robotic Arm (R.A.1) This is a robotic arm with 4 degrees of freedom. Arm made from aluminum and galvanized iron which i cut and pierced in C.N.C pantograph machine. Also in the base of arm i appended 4 balls caster for free and stable movement. For servos controller i used a parallax servo controller which i programmed on PSCI software.
This is a companion discussion topic for the original entry at https://community.robotshop.com/index.php/robots/show/robotic-arm-r-a-1