I am making a robot with 4 tracks with 4 motors, each motor has a stall current of 2800ma and 162ma no load at 12v. So i thought around 1.5amps a motor would be good but i also have a dual motor esc. 1 for each side. I need help choosing a lipo battery to power it. It will also power a led light bar which is 6 amps, 2 servos, and a fpv transmitter with camera. thanks
If you want a LiPo, the closest to 12V is a 3S (11.1V). The capacity is a measure of how long you want the robot to last.
robotshop.com/en/lithium-pol … packs.html
Note that the higher the capacity, the heavier the battery.
RC servos tend to operate at 4.8V to 6V, so you’ll need to use a BEC or voltage regulator.