Hello,
I am trying to write to an RFID Card similar to the Icode-2(Phillips) tag. It requires that the option flag be off when writing. I purchased my RFID scanner from APSX and their protocol manual only provides example hex code with the option flag enabled.
The code to write to a tag via the APSX scanner I have is:
0A 00 43 21 00 06 07 08 09 CD F6
where the 43 is the hex for the flags.
I have tried changing it to 03 to disable the option flag however I am still not able to write to the tag. I am able to write to the tag using the APSX test application they provided with the option flag setting off so I know this is the solution I need.
Is there anything else I need to change in my write code?
Any ideas are greatly appreciated!
-Cullen