As stated in the title im trying to find what the make and model of clip that connects to the mighty board rev g extruder port j7. The clip is an 8 way single line type that has the stepper motor, heater and fan on it to connect to the mighty board. bottom right of the posted image from the robot shop website.https://www.robotshop.com/media/catalog/product/cache/7/thumbnail/9df78eab33525d08d6e5fb8d27136e95/m/a/makerbot-replicator-2-extruder-assembly.jpg
Hi dan3088,
You are looking at the eight wires connector on the extruder head ?
The information is not provided by MakerBot but looking at a board here it seems to use a 1.5mm pitch connector.
Yes the 8 to the extruder header on the mighty board it is proving to be quite difficult to obtain this information i am assuming because of makerbots reluctance to provide technical information.