Recommend a receiver

I have a FlySky FS-TH9X transmitter and I am looking to pick up a receiver for the exclusive purpose of working with my Nano. Considering the wiring harness and the available software, has anyone had extraordinary success matching their Nano to a particular receiver? Thanks.

What do you mean by “matching” the receiver ?
The Nano will handle any normal R/C receiver which output PWM signals for “Servo” control. There are also options for PPM input directly which is connected on the “THROTTLE” channel only.

:slight_smile:

I am going to purchase one in the near future and I was wondering if anyone had a favorite.

A clean way is always PPM if you can, it will only have one cable (3wires) from the receiver and the Quadrino Nano.
Make for a clean and easy installation.

Doing a search for a PPM receiver is blowing my mind with all sorts of new information that I cannot handle right now as I am still a newbie at this. It seems that people are typically satisfied with Orange brand receivers. The closest thing I saw to ppm was cppm and I have no clue what the c stands for. I also do not understand if I would need a module for my transmitter.
I have the FlySky FS-TH9X and I would like to get a receiver that will utilize a PPM connection. The transmitter has a PPM setting but I do not know if I still need a module.

This is what I am looking at:
OrangeRx R615X DSM2/DSMX Compatible 6Ch 2.4GHz Receiver w/CPPM
or
2.4G Flysky FS-iA6B 6 Ch Receiver PPM Output with iBus Port

I would go for the “2.4G Flysky FS-iA6B 6 Ch Receiver PPM Output with iBus Port” because it does have the PPM output and is made for your transmitter.