Hi!
I require your help regarding a problem I’m encountering.
Description: Raspberry Pi 3B+ with RB-Adu-88 (IMX219 M12) not running, need help.
Hardware concerned: Raspberry Pi 3B+ with RB-Adu-88 (IMX219 M12)
Software concerned:
Troubleshooting steps already taken: Have installed several operating systems on the RbP but it doesn’t solve anything. First I install raspbian full 32bit, then in the setup I turn on the camera. Then I get error messages.
# raspistill -o /tmp/gate_now.jpg
mmal: mmal_vc_component_enable: failed to enable component: ENOSPC
mmal: camera component couldn't be enabled
mmal: main: Failed to create camera component
mmal: Failed to run camera app. Please check for firmware updates
**Additional information**: I updated raspbian and checked the connectors, they are rock solit and good in place.
Thank you so much in advance for your help!