Using flowbotics could you describe to me how to edit the controls for a ps2 controller? I know how to get the the user programming section and PS2 controller section but I am unsure how to edit individual controls. For example if I want to change the control for base rotation from L1 and R1 to say L2 and R2 for example how could I do this? Thanks.
Hi,
This can be done by removing the current links between the output of the PS2 controller and creating new ones to the module you wish to control. You can see the modules in this post (2nd picture).
We recommend that you go through the user guide (see the bottom of the linked post above) and check out the component reference guide for the components that you wish to use (such as the PS2 controller).
Before you start programming with FlowBotics Studio, it would be best that you read the user guide (at least the basics so you know how to do things like create new modules, change the interface, links things together, etc.).
Sincerely,
Using flowbotics could you describe to me how to edit the controls for a ps2 controller? I know how to get the the user programming section and PS2 controller section but I am unsure how to edit individual controls. For example if I want to change the control for base rotation from L1 and R1 to say L2 and R2 for example how could I do this? Thanks.
See the answer above.
Also, here is a copy of the reference links:
FlowBotics Developer Zone
FlowBotics Studio - User Guide
FlowBotics Studio - Component Reference