Hello everyone,
I developed an IV curve tracer for PV systems as my final project for the university and I would like to share it!
It can be used for strings up to 400Vdc and 10Adc, which translates into about 12 PV modules in series.
My results are pretty fine but there is still room for development, mainly in the current sensor.
It was Arduino-based and had a capacitive load technology.
Hope you enjoy it!
Presentation Banner:
https://drive.google.com/open?id=0Bw2ILobxsxA4QnFIeG9CWmhSSzg
Full report:
https://drive.google.com/file/d/0Bw2ILobxsxA4ckg0dXJqTWlsTW8/view?usp=sharing