Materials:
- polmorph (of course)
- 4 ice cream sticks
- 1 long and 1 short mechano panel
- some flat plastic
Tools:
- needle nose pliers
- glue gun (w/ glue sticks)
Step 1:
Cut your sticks to a desired length. Note! The sticks are ~2mm (~0.078in) wide, so when you are cutting,
you should add those 2mm (~0.078in), so you 'll have the right length of the square.
Step 2:
Bend the mechano parts in to a L 90° shape.
Step 3:
Glue one L shaped mechano part with one stick. Doing this four times, you should glue all of them
in the same direction.
Step 4:
Place the glued L-s together to form a square, and then glue them together on a plastic platform.
That’s all.
P.S. This is my first blog post.