First of all, sorry if this is in the wrong forum. But onto the question:
I've recently been designing my first robot, following the "start here" tutorial. I have most of it designed and drawn up in SketchUp, but the last thing I need to place is the project board (AXE020 for 28X1.) I have the dimensions of the board, but the one thing I would like to find out is whether or not there are any holes to screw the board down with, and if so where they are located (specific measurements if possible) and the diameter of the holes.
A quick search here found A quick search here found this link, showing a hole on the upper right corner, and mid left. No apparent dimensions, but can estimate from 0.1" spaced pins.