I have a brand new phoenix , it is built per the instructions. it has ps2 wired per instructions. Nothing works. get a gren light on ps2 receiver. get a yellow steady light onbottboardarduino, get a steady green light on ssc 32 servo controller. 9v batt on logic, 6volt 2800 mah battery on servos. no power to servos. please help
Hi,
We can certainly help you with this situation.
The first step will be to gather some more info about your setup, which will require some extra work on your part, possibly disassembling some parts for the pictures. Here is what we’ll need to get started:
]A picture of your SSC-32, making sure to clearly show the jumpers, the power connections and the servo connections./:m]
]A picture of your BotBoarduino. As #1, make sure to clearly show the jumpers, the power connections, the serial connection to the SSC-32 and the PS2 adapter/receiver./:m]
]A picture of your PS2 adapter/receiver, clearly showing the connections to the BotBoarduino./:m]
]An attachment of the code you are currently using as-is. You can just ZIP the entire folder and attach that as-is./:m]
]Any other details about any other trouble shooting you have done./:m]
You can attach images to your reply using the Full editor mode (see the attached image for details).
We await your reply to further diagnose the issue(s).
Sincerely,
For the pictures, either resize them or upload them to an image share website (make sure they can be viewed publicly) and post the links here.
As for the code, you would need to upload all of it, not just the .INO. This includes the config files and everything else in that package.
Phoenix is working perfectly. Changed baud.Thanks foir the help