NOTE: IF YOU WANT TO COMMENT, DON'T COMMENT HERE, COMMENT ON THE PROJECT PHOENIX ROBOT POST, I'M VERY LAZY BUSY TO CHECK THE COMMENTS HERE
Here i am again for another update, now on a blog, no more long robot posts! sorry for a long update because of... you know...laziness......being busy!! so, what for today...
Battery pack, yes, the main source for all robots (well not really all, solar powered or steam...ya kno) i have created the battery pack from an old plastic top, and coca-cola™ tin can,
here are some pictures:
here is the tin can cut and attached to the battery, it is place like that so the battery can slide if you want to recharge or to replace it
here with hotglue :
plastic top cut and placed:
Now for the head mechanism, not actually for the whole head, just for the mouth, here is the mechanism (i used a tiny motor from an old cellphone and a gearbox form the old project RNGTN):
ASSEMBLY:
the following pictures shows the whole process of assembling the head mechanism with the battery pack (you can see that the head mechanism has a wheel with axle, that's the main part of the mechanism)
here shows the arm gearbox with a wheel, gonna place an axle and the arm on it for the whole arm mechanism and oh also the spinal cord:
place and hot glue the two like this:
soldered a plug for the head motor:
here is what it will look like when the head is placed:
Popsicle sticks, bought them for the "skin" of the project, but here place for the head support:
here sanded clean:
head(mouth) mechanism:
hot glued and placed:
a last look:
yeah i know the picture above is the same above it, but, you can see it's eyes are fixed now, that's it for now, so wait for the next update, Cheers!
- ⁰ℨ {:(|)