Hi, newbie here~
I have been searching for answer to connect Phidgets and SSC-32. Anyone? Any ideas?
You have to connect the SSC-32 to an RS-232 (like on a PC, with DB9 connector) or TTL level serial port like what you have on a microcontroller. As far as I know, you can not connect the SSC-32 to any Phidgets device. You can also use a USB to serial adapter like the one Lynxmotion sells.
What are you trying to do?
8-Dale
Just “Phidgets” is a little vague. You might give us more detail.
Alan KM6VV
Thanks guys! I end up putting phidgets SBC on lynxmotion’s track device without SSC-32. Therefore I bought the bot board II with microbasic chip instead.
But having hard time to connect SSC-32 and microcontroller together. It works fine before I connect SSC32 to boardII. Servos works fine, no problem with power, jumper or anything.
The PS2 cable I got has different color than the one on instruction. Not sure if I should re-arrange it or not.
Sorry I am only newbie and just start to build robots 2 month ago from NXT and thanks again for any helps!