So I got past my f80 issues - appreciate the help. I put a quad of DYS Fire KV2300 in. I can’t get them to arm. I went through this manual:
lynxmotion.com/images/docume … deV1.1.pdf
Using WinGUI I calibrated the Accelerometer and compass, and set the end points. Throttle, Aileron, Rudder and Elevator all show ranges of 1000 to 2000 just like the manual says.
The ESC’s were calibrated per the manual as well.
In WinGUI, both the Flight Deck and RC Control Settings tabs have a “Live RC Data” gadget on the upper right corner. The respond to the controls of the transmitter. Everything is 1000 to 2000.
I’m not sure what to do next. Any thoughts? Thanks.