can anyone tell me where the 2 tiny black rubber blocks go please,they dropped out when i replaced the side brush o ring today and I ant find where they have come from
1 Like
Hi @mandy30 and welcome to our forum.
It seems that these 2 tiny black rubber blocks are there to hold wires down.
You don’t need to install these if you don’t want.
These are just to secure that you do not pinch the wires while assembling the robot.
Hi, Thank you so much for letting me know,I may as well put them back noww I know where they go
1 Like
no I looked at loads but could,nt find one
1 Like
OK, no problem