If you are the original author, please access your User Control Panel and update it.
I thought I should make a "Start Here" robot, so I did! When I built the control board, I included an EEPROM, IR remote, 2 trimmer pots and wired the motor driver to the PWM outputs so I should have quite a bit of room in terms of code-play. To be honest, I have no idea what I am going to have it do, but again, all options are open with what I included on the board. For now, just a simple slide/spin code to drive around. Pictures:
This is a companion discussion topic for the original entry at https://community.robotshop.com/index.php/robots/show/my-start-here-robot