I managed to finish my first robot on witch I spent a lot of time, mostly because a lot of stuff was new to me. It is not very complicated but it seems to do it's job well. I posted everything about the build on my blog and also the parts I used (and the ones I rejected).
It is a Tamiya tracked platform with dual gearbox. I used an Arduino UNO and a SeeedStudio motor shield to drive it from a 11.7 lipo battery I had from my RC heli. It uses a Ultrasonic sensor to look in front and also a DIY IR sensor for backing up. I also added a temperature sensor for the fun of it.
If you want to look at the brain, I put it on SourceForge for easy access: https://sourceforge.net/projects/trackedrobot/files/robot_tracks.ino/download
The build log is here:
Part 1:http://errincode.blogspot.com/2013/02/arduino-autonomous-tracked-robot-build.html
Part 2:http://errincode.blogspot.com/2013/02/arduino-autonomous-tracked-robot-build_25.html
Part 3:http://errincode.blogspot.com/2013/02/arduino-autonomous-tracked-robot-build_27.html
More photos and videos:http://errincode.blogspot.com/2013/02/arduino-autonomous-tracked-robot-visual.html
autonomouse navigation
- Actuators / output devices: tamaiya dual gearbox and tracks
- Control method: autonomous
- CPU: arduino uno
- Power source: 11.7 3 cell lipo battery
- Programming language: C
- Sensors / input devices: IR sensor, temperature sensor, HC-SR04
- Target environment: indoor
This is a companion discussion topic for the original entry at https://community.robotshop.com/robots/show/my-firstmonster-or-fm-for-short