If you are the original author, please access your User Control Panel and update it.
This is my first cut at programming a robot. Puting the kit together was pretty easy after dealing with some shipping damage. Then after some experimentation I got the bot wandering around without running into too much stuff. Some of the issues that I ran into: interference from the motors before I installed .1uf capacitors across the motor terminalsdiscovering that I really had no choice but to mount the "controls" on a panel off the top plate because the motor sheild and IO sheild with ...
This is a companion discussion topic for the original entry at https://community.robotshop.com/index.php/robots/show/my-first-run-at-robotics