Can the motor on RB-Fra-29 or similar linear acuator be swapped out with an FRC legal motor like a CIM or Rev NEO?
Hi,
Personally, I wouldn’t open an RB-fra-29 actuator since it may be hard to reclose after.
So I don’t recommend it.
Also, I can’t guarantee that the motor you choose will fit directly in the gear of the Actuator.
You can see the size specifications here: https://www.robotshop.com/media/files/images/fa-400-l-12-dimensions-large.jpg
But if you plan on doing this, make sure you write a tutorial and post the project on our forum.
Good luck and make sure you know what you are doing and that the motor you choose will respect the specifications of your project.