El modo MODE del mando lynxmotion se activa y desactiva solo. He cambiado el arduino y sigue haciendo los mismo. Alguna sugerencia?
Gracias
Welcome to the RobotShop Community. In order to help troubleshoot the PS2 remote, we would need to see the connections between the PS2 receiver breakout board and your Arduino microcontroller (clear photos). You would also need to tell us the sample code you are using, and confirm you have the PS2 library installed correctly and working.
Note that the pins from the receiver breakout to the Arduino need to correspond to what’s in the code. If you are following a robotic project on Lynxmotion’s website, the pinout is different from what’s found in the PS2 examples sketches.
Traductor de google
Bienvenido a la Comunidad RobotShop. Para ayudar a solucionar el problema de PS2, necesitarĂamos ver las conexiones entre la placa de conexiĂłn del receptor de PS2 y su microcontrolador Arduino (fotos claras). TambiĂ©n deberá indicarnos el cĂłdigo de muestra que está utilizando y confirmar que tiene la biblioteca de PS2 instalada correctamente y funcionando.
Tenga en cuenta que los pines de la ruptura del receptor al Arduino deben corresponder a lo que está en el código. Si está siguiendo un proyecto robótico en el sitio web de Lynxmotion, el pinout es diferente al que se encuentra en los bocetos de ejemplos de PS2.