My rover kit came with 4 HN-GH12-2217Y Hsiang Neng motors, but no capacitors.
In the motor tutorial, it does not specify the value of capacitors to use.
But I can read “103” on one of the tutorial photos, so I suspect 0.01 uF caps are suggested.
The closest I have to that value are “333” or 0.033 uF, which should work fine. …Right??
The capacitors are not required. The motors are low current and do not create a significant amount of electrical noise. I will review the tutorials to correct this.
Thank you.
If you want to, you can use the capacitators you have, no harm done