Using 2 cordless drill motors at 12 volts in tank steering with flysky rc. Will the mddrc10 be ok for mixed channel tank steering for this setup. Thx Graham
1 Like
Hi @Gchap and welcome to our forum!
If these two motors are DC brushed motors, and if Flysky can be powered with 5V (and not consuming more than 500mA), it should work in Mixed mode as following:
- Channel 1 : Forward/Backward
- Channel 2 : Turn Left/Right
Note that actual motor direction is depending on the motor connection.
Swapping the connection (MxA & MxB) will reverse the direction.
Feel free to ask anything else.
Many thanks. Graham
1 Like