I am currently in the process of attempting to configure my Quadrino Nano for the TSA states drone challenge. I am using the Lynxmotion HQuad500 Drone (Base Combo Kit + Quadrino Nano Controller) along with RadioLink AT9S Pro 2.4GHz 10CH Transmitter w/ R9DS 9CH Receiver. When I connect the USB cable, WinGUI shows that the throttle is moving up and down along with the transmitter, however the motors never spin. I’ve tried configuring all settings to the minimum for the motors to spin up for testing purposes, but it doesn’t seem to do anything to help. While I’m not sure if I’m arming it properly, I’ve followed the arming instructions in the link below and it doesn’t seem to work. Any advice on fixing this would be much appreciated.
1 Like
Hi 2025drone,
In WinGUI you should see the “arming” status as well as the other information.
To get the Quandrino Nano to arm (or any Multiwii flight controller) you need to have the signal set so you read 1000 to 2000 for each of them.
It’s called “2.5.2 - Receiver & End Points” in the user manual (pdf you provided).
If that’s not working, provide as much details as possible like screenshots of your WinGUI etc.
1 Like