Hi! Any help is welcome Newbie here but I could use some help from the Forum, where can I find a robot arm that can hold a 225 gram rubber hammer. its for an art project I had in mind! where the arm hold the hammer and is able to do movement done by a controller, meaning the s…

Hi @larakster and welcome to the forum. You have an interesting project :slight_smile: 225 gram is not too much, so you should be able to find a relatively small robotic arm. You can see here which Robotic Arms RobotShop sells: https://eu.robotshop.com/collections/robotic-arm…

Hey , :grinning: i hope it will work out!! thank you for recommending the robot!! do yuo recommend any cheaper robot arms? or is this range the only one that could carry that weight. Warm regards, Larakster

Hi @larakster ! You are welcome. Maybe you can find also another cheaper robotic arm but that really depends on your needs. How many degrees of freedom do you need? For example, do you really only need ONE degree of freedom to rotate the hammer to hit a nail at a specific sp…

Hi @larakster . There are two robot arms on sale in our shop,I think it should work well for your project. You can see here which Robotic Arms RobotShop sells: https://www.robotshop.com/products/6-dof-ai-vision-robotic-arm-with-ros-python-programming-jetson-nano-4gbw-o-jetson-n…

Hey @Riley224 Thank you for your suggestion!!! it doesnt have to be industrial grade its mostly about the movement and the impact. @igor_X So I cant have it delivered to the netherlands but i am not looking for the same model. but the both of you habe made my search easier sinc…

Hey Igor_X, Sorry I didn’t reply, the notification ended up in my spam! Thank you so much for your help. it will be a multi axis robot arm, I would love the have a 3 axis one, however since they are build up bottom upwards. 2 axis would suffice. The idea which is a bit fatali…

it will be a multi axis robot arm, I would love the have a 3 axis one, however since they are build up bottom upwards. 2 axis would suffice. That’s not quite a robot arm. Two axes is effectively a pan and tilt: https://www.robotshop.com/products/spt200-drive-pan-tilt-system-f…

[image] Riley224: https://www.robotshop.com/products/yahboom-dofbot-ai-vision-robotic-arm-w-ros-python-programming-for-raspberry-pi-4bwithout-raspberry-pi-board Thank you so much Riley! I believe I will try both approaches to figure out what would work best! one lasercut …

ok，Have a nice day :innocent:

RobotShop Community

Looking for a robot arm that can hold a 225 grams hammer (art project)

Help & Support Robots & Kits

igor_X March 10, 2023, 12:15pm 8

Hi @Riley224 !

Thank you for your suggestions.

Are you able do deliver to Europe? Because, I think @larakster is from Netherlands.