LMR Spirit Detector

Update:

I got myself a new camera that can take exposures in up to 30 seconds at a time. So I took some new pictures this late night. I found lots of energy surrounding some strangely shaped black blob in the middle of the room, .

Below are 3 pictures where you may be able to put together to a 3D perception of the shape. 

Note that the green stripes represent my control light. If there where no spiritual energies, all we would see would be green lines. I think where the blue ball lights up, there is energy. Or the other way around. Under all circumstances, there are these shapes in my room, and they change. Even between the 3 shots, it had altered itself a little. It is hard to get a precise idea of how, when all I have is this thing to move around and detect.

Of course it is hard for you to see the 3 dimensions, but on one of the pics, I am only moving the detector in one plane, and you can see some of the shapes that I can see here all the time, moving around.

High res here:

http://picasaweb.google.com/fritslyneborg/GhostDetector#5530995645691400050

DSCF0064.jpg

DSCF0063.jpg

DSCF0062.jpg

Below is original post.


As originally stated here:

https://www.robotshop.com/letsmakerobots/node/12034

I always wanted to make one of them machines that can detect ghosts, spirits, paranormal energy levels, the beyond etc.

Problem until recently was, that I did not know how, because I suck at electronics. However, since I got an DSO Nano oscilloscope, things have cleared up for me, I understand so much more what is going on.

After sitting in a bus with Nils for a trip up through europe, I got inspired to use my new knowledge of electronics in combination with he's light drawings in air, and then I made this circuit:

Billede_9.png

It is a tuned version of the 6 Million Gain project from this brilliant site. My version, however, has 30.000*30.000*30.000 times amplification, which is needed to tune in to the other dimentions etc. (27.000.000.000.000 times amplified waves, it opens a lot of doors to the unknown!)

When my wife saw the video, she was pouring limonade. And she made the classic of just not stop pouring :D Limonade all over the table. I fell down the chair of lol!

Below are 2 pictures where I cought / detected something that must have been a small ghost or something. Perhaps a dead tree from past times, i dont know, as this is a very raw machine, I am yet to tune it finer.

As you can see on the green lines, (LED from power on on the apparatus), only at some points / in a specific area is the blue spirit-detector illuminated. I may have to see if knifes get sharper there or something.

IMG_6821.jpg

The circuit is easy to make, and cheap. One could make a robot that drowe around, and put marks on the floor or something. Beeping when some abnormal energy levels where detected.

IMG_6820.jpg

 

https://www.youtube.com/watch?v=2fq6kiY7D6E

now this is sweet :smiley:

now this is sweet :smiley:

Not since Gareth’s last work

Not since Gareth’s last work has the “Something Else” tag been so appropriate…

LOL! :smiley:

LOL! :smiley:

Ghostbusters

Nice high amplifying electronic electroscope you built there, Fritsl.

Two ideas:

Mount the electronic electroscope on a robot platform. If your spirit detector detects a “ghost”, the robot plays Ghostbusters (I have the Picaxe tune code if you need :)) and the robot fires its proton gun :smiley:

I would add between antenna and base of the BC 517 a resistor to avoid the transistor getting fried if the antenna gets in conntact with +6V. I know, unlikley, but Murphy’s law obtains everywhere :slight_smile:

**Spooooky! **

Not sure if I’ll be able to sleep well this night after knowing that “they” are so close around us. Or maybe (hopefully!) it’s only a danish phenomenon? 

I definitively have to dig deeper into this, looks quite promising. I have a cell phone antenna right across the street not sure if I want to know how my place looks like in the night. 

Does it react on your skin too? E.g. when approaching the circuit with your hand? 

Really, really cool, Frits! 

Thanks :)An apparatus this

Thanks :slight_smile:

An apparatus this sensitive will react on most energies. And so of course also aura, which is easily detected. However, I have put it on a stick to avoid false readings of my own aura.

How do you make a proton

How do you make a proton gun?

It seams quite hostile, btw? Like “I have detected you, so now I will shoot”? perhaps give them some milk or something instead? it would be easy to make, just have some milk and a bowl ready.

I thought on the proton gun

I thought on the proton gun from the movie ghost busters. No idea now how to make one :slight_smile:

GhostBusters_March__663_-550x.jpg

guys… this I think isn’t a

guys… this I think isn’t a ghost detector… it detects only the change in Earth electromagnetic field… I think, but correct me if I’m wrong :slight_smile:

**i love normal circuitry **

i just love circuits that don’t involve a micro controller , i will build up the circuit and try to fine tune it some more , will tell you where that leads me :slight_smile:

Get real!

Changes in magnetic fields are made by things from the other side(s), ghosts, spirits etc. Obviously.

I think you are just the devil talking. Or a ghost afraid of being revieled.

We will do you no harm! (At least I will not, TinHead will trap you, watch out!)

Take this thing to

Take this thing to a cemetery but do not be surprised when it does not work on zombies! 

Wicked!

Wicked!

got milk?

Maybe he really hates milk?

Everybody loves milk.And it

Everybody loves milk.

And it works with stray dogs and cats… and all sorts of wild animals. Everyone loves that. Obviously.

Say Cheese

Nice Frits,

When are you going to make the Kirilian Flash?

I get the circuit, fritsl,

I get the circuit, fritsl, but what is the sink plunger for?

That is an antenna :slight_smile:

That is an antenna :slight_smile:

Thanks :)But I am not gong

Thanks :slight_smile:

But I am not gong to make a Kirilian Flash - that tuff is just photo technicques etc, boooring IMHO.