I am using a linear actuator to rotate a set of retracting steps for a motorhome (24v), these steps (mounted within a frame) firstly rotate through 90 degrees from a single pivot front hinged position from underneath the vehicle before deploying. The system is being controlled via a basic PLC for each task/operation. What I need to achieve is load sensing the linear actuator that is used to rotate the steps frame out from, and back in under the vehicle for ‘trap’ protection.
I have found a device made by Firgelli in Aus that appears it would be suitable for the system but there appears to be no UK stockists at all for this device and shipping from Aus is not possible due to time constraints (their website also shows it is out of stock anyway).
Can anyone recommend or point me in the right direction please for a similar suitable product that would achieve the same goals?
Many thanks in advance.