Hi:
I am doing a self-service kiosk project.
I purpose is to automatically dispense to the user, once finished a transaction, a 8 x 10 tri-fold brochure made on thick paper.
I have consulted with several printer and scanner manufacturers to see if it could turn one such a device into a document dispenser machine. I have no response, or there is no such device.
So, I saw your site and it seemed like a wonderful arena to create
I saw several components that may seem to work well together ideally for the project:
Please advise:
-
I saw your Acutronics Linear actuator Board. This would be activated with a 5vdc pulse.
-
The other component would be: L16 Linear Actuator 140 mm
Testing the Mockup, I can see that the trip of the actuator to open and close the drawer is about 5 inches.
Please also recommend if this model suits well and if with only (1) L16 is sufficient to hold.
Or it would take two of them for a secure/tight opening and closure.
Also if they are compatible with the Acuctronics Linear Board.
Looking forward for your response.
Thank you,
Let me see if I can attach a small video of the mock up unit I made out of cardboard.