Hello There:
I made an R/C lawnmower using 2 Jazzy Electric Wheelchair motors, 2ea Lead Acid batteries 12VDC connected in series for a 24VDC source controlled with a Flysky-FS-CT6B-2-4Ghz-6CH-RC-Transmitter. Receiver is connected to motor driver as: CH1 (Left & Right) to S1 and CH2 (Forward & Reverse) to S2. DIP sticks are as: 1=Off, 2=On, 3=Off, 4=On, 5=Off, 6=On. Everything it’s fine and as should be.
Moving forward I’m looking to obtain both -12Vdc & +12Vdc output from P1 on order to move a 3rd motor back and forward. As an input I’m planning to use one of the R/C channel outputs to control the signal into A1. Here is where I need some help in order to understand how I can make it happen. Probably using DEScribe? Not sure…