Any guide would be appreciated please thank you
To confirm, you are looking to connect an older generation Lynxmotion arm to a MAC computer?
If so, note that we have unfortunately never released software for Lynxmotion which is MAC compatible.
I don’t mind not being able to use the software, currently I am using terminal to check the connect between the mac and ssc 32 with usb to serial. Yes it is an older version of SSC 32 driver running the arm.
I will have a look at the wiring as this was given to me by my friend to work on so I haven’t looked much at the manual to setting it up.
The problem is I am not able to detect any connection from SSC 32 to mac it doesn’t detect that the usb has been connected
The older versions of the SSC-32 require a serial to USB adapter, which are unfortunately not all made equal. Try plugging in the cable alone to see if it’s detected by your computer, and if not, then it would be the issue. The adapter we carry was selected after many tests and trials: robotshop.com/en/serial-adap … -sb2s.html