To switch between controlling your Unitree robot with the mobile app and the handheld remote, only one control device should be connected at a time. If your robot is currently paired with the app, close the app or disconnect from the robot’s Wi‑Fi network before turning on the handheld controller; then power on the remote and press the connect/bind button as described in the manual. The controller will pair with the robot and take over control. To hand control back to the app, turn off the controller and reconnect your phone or tablet to the robot via AP or Wi‑Fi mode through the Unitree app. Avoid operating the robot from multiple devices simultaneously to prevent conflicts. Refer to your model’s guide for specific pairing sequences.
Have questions? Reach out to our specialists here:
Browse available models here: